|9W-22W LED Strips||9, 12, 14, 18, 22W||2-2′ strips, 1-Driver||3080LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|12W-36W LED Strips||12, 14, 18, 22, 28, 36W||3-2′ strips, 1-Driver||5040LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|18W-44W LED Strips||18, 22, 28, 36, 44W||4-2′ strips, 1-Driver||6160LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|22W-72W LED Strips||22, 28, 36, 44, 72W||6-2′ strips, 1-Driver||10080LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|44W-88W LED Strips||44, 72, 88W||8-2′ strips, 1-Driver||12320LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|20W LED Strips||20W||2-2′ strips, 1-Driver||3080LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|20W-36W LED Strips||20, 36W||3-2′ strips, 1-Driver||5040LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-44W LED Strips||36, 44W||4-2′ strips, 1-Driver||6160LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-72W LED Strips||36, 44, 72W||6-2′ strips, 1-Driver||10080LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-88WLED Strips||36, 44, 72, 88W||8-2′ strips, 1-Driver||12320LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
About Our LED Strips
Using the same ultra high efficacy LEDs and power supplies developed for our `best-in-class` tube lights, we offer a direct, field installable LED Lighting Strips kit that provides one of the easiest to install and most affordable lighting upgrade available today.
Employing a direct molecular fusing between the aluminum core PCB carrying the LEDs and the low profile strip extrusion ensures the lowest LED in Situ TMP reading we have ever seen in a high efficacy LED Lighting Strips system. Based on the data sets, the calculated Energy Star point is greater than 240,000 hours.
Our multi-volt (110-277 VAC) proprietary LED drivers with active power factor correction and a discontinuous current mode of operation deliver efficiencies up to 94%, a PF-0.996 and THD <6%. Built with premium components, the MTBF rating on the LED drivers is greater than 140,000 hours. also available in 0-10V dimming Ten Years Replacement Warranty.
With these level of quality, efficiency and cool operating temperatures, we are able to provide a complete system replacement warranty for a full ten years and 100,000 hours stated lifetime with no pro-rating of an exhaustive list of exclusions.Fast, simple installation, only one tool required.
The complete system has been designed to cut installation time and complexity to the minimum. freedom to locate the LED strips and the driver within the fixture allows, optimizing the fit for each application the installer simply positions the strips in as desired in the fixture and inserts three TEK screws with a cordless driver. This provides a positive mechanical attachment while the integral extrusion ensures excellent thermal management.
In 5 simple steps, the retrofit is complete.
- Remove existing tubes and ballast
- Install new LED Driver
- Fasten the fixture
- Connect jumpers to the PCB Board
- Connect input power
Installation time is less than 10 minutes per fixture!
12W-36W LED Light Strips 3-2′ strips
|12W-36W LED Lighting Strips 3-2′ strips