|9W-22W LED Strips||9, 12, 14, 18, 22W||2-2′ strips, 1-Driver||3080LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|12W-36W LED Strips||12, 14, 18, 22, 28, 36W||3-2′ strips, 1-Driver||5040LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|18W-44W LED Strips||18, 22, 28, 36, 44W||4-2′ strips, 1-Driver||6160LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|22W-72W LED Strips||22, 28, 36, 44, 72W||6-2′ strips, 1-Driver||10080LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|44W-88W LED Strips||44, 72, 88W||8-2′ strips, 1-Driver||12320LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|20W LED Strips||20W||2-2′ strips, 1-Driver||3080LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|20W-36W LED Strips||20, 36W||3-2′ strips, 1-Driver||5040LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-44W LED Strips||36, 44W||4-2′ strips, 1-Driver||6160LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-72W LED Strips||36, 44, 72W||6-2′ strips, 1-Driver||10080LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-88W LED Strips||36, 44, 72, 88W||8-2′ strips, 1-Driver||12320LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
LED Strips 20W/2-2′
Using exactly the same ultra high efficacy LEDs and power supplies developed for our ‘best-in-class’ tube lights, we offer a field LED design kit that provides among the easiest to install and inexpensive lighting update available now.
Implementing a molecular fusing between the aluminum center PCB carrying the LEDs along with the low profile strip extrusion ensures that the LED in Situ TMP reading we have observed in a high-performance LED lighting method. Dependent on the data sets, the calculated Energy Star stage is greater than 240,000 hours.
The MTBF score on the LED drivers is significantly greater than 140,000 hours. Available in 0-10V dimming Ten Years Replacement Warranty.
With these amount of quality, efficiency and cool operating temperatures, we are able to provide a complete system replacement guarantee for a full ten years and 100,000 hours said lifetime with no pro-rating of a comprehensive list of exclusions.Fast, simple setup, only 1 tool required.
The complete system has been designed to reduce at complexity and installation time . Freedom to locate the LED strips along with the driver allows, inserts three TEK screws with a driver and optimizing the match for each application the installer simply places the strips . While exceptional control is ensured by the integral extrusion this provides a favorable attachment.
In 5 easy steps, the retrofit is complete.
- Eliminate existing tubes and ballast
- Install fresh LED Driver
- Fasten the fixture
- Connect jumpers into the PCB Board
- Connect input power
- Setup time is less than 10 minutes each fixture!
20W Fluorescent Retrofit 2-2′ LED strips
|20W LED Fluorescent Retrofit 2-2′ strips