|9W-22W LED Strips||9, 12, 14, 18, 22W||2-2′ strips, 1-Driver||3080LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|12W-36W LED Strips||12, 14, 18, 22, 28, 36W||3-2′ strips, 1-Driver||5040LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|18W-44W LED Strips||18, 22, 28, 36, 44W||4-2′ strips, 1-Driver||6160LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|22W-72W LED Strips||22, 28, 36, 44, 72W||6-2′ strips, 1-Driver||10080LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|44W-88W LED Strips||44, 72, 88W||8-2′ strips, 1-Driver||12320LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|20W LED Strips||20W||2-2′ strips, 1-Driver||3080LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|20W-36W LED Strips||20, 36W||3-2′ strips, 1-Driver||5040LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-44W LED Strips||36, 44W||4-2′ strips, 1-Driver||6160LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-72W LED Strips||36, 44, 72W||6-2′ strips, 1-Driver||10080LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-88W LED Strips||36, 44, 72, 88W||8-2′ strips, 1-Driver||12320LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
Our multi-volt (110-277 VAC) proprietary LED drivers with active power factor correction and a discontinuous current mode of operation deliver efficiencies up to 94%, a PF-0.996 and THD <6 percent. Built with premium parts, the MTBF score on the LED drivers is significantly higher than 140,000 hours. Also available in 0-10V dimming Ten Years Replacement Warranty. In 5 easy steps, the retrofit is complete.
- Remove existing tubes and ballast
- Install fresh LED Driver
- Fasten the fixture
- Connect jumpers to the PCB Board
- Connect input power
The complete system was made to reduce installation time and complexity. Freedom to locate the LED strips and the driver within the fixture allows, optimizing the match for each application the installer simply places the strips and illuminates three TEK screws using a driver. While thermal control is ensured by the extrusion this provides a favorable mechanical attachment. Employing a guide molecular fusing involving the aluminum core PCB carrying the LEDs and the low profile strip extrusion guarantees the lowest LED in Situ TMP studying we have seen in a top efficacy LED lighting system. Dependent on the data collections, the calculated Energy Star stage is greater than 240,000 hours. With these amount of quality, efficacy and cool operating temperatures, we are able to provide an entire system replacement guarantee for a full ten decades and 100,000 hours stated lifetime free of pro-rating of an exhaustive list of exclusions.Fast, simple installation, only 1 instrument required. Installation time is less than 10 minutes each fixture!
Using the efficacy LEDs and power supplies developed for our ‘best-in-class’ tube lighting, we offer a field LED retrofit kit that provides one of the easiest to install and most inexpensive lighting upgrade now.
LED Fluorescent Retrofit 8-2′ Strips
|36W-88W LED Fluorescent Retrofit 8-2′ Strips