|9W-22W LED Strips||9, 12, 14, 18, 22W||2-2′ strips, 1-Driver||3080LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|12W-36W LED Strips||12, 14, 18, 22, 28, 36W||3-2′ strips, 1-Driver||5040LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|18W-44W LED Strips||18, 22, 28, 36, 44W||4-2′ strips, 1-Driver||6160LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|22W-72W LED Strips||22, 28, 36, 44, 72W||6-2′ strips, 1-Driver||10080LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|44W-88W LED Strips||44, 72, 88W||8-2′ strips, 1-Driver||12320LM||Non-Dimmable||100-277V||cUL Listed/DLC Approvd|
|20W LED Strips||20W||2-2′ strips, 1-Driver||3080LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|20W-36W LED Strips||20, 36W||3-2′ strips, 1-Driver||5040LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-44W LED Strips||36, 44W||4-2′ strips, 1-Driver||6160LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-72W LED Strips||36, 44, 72W||6-2′ strips, 1-Driver||10080LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
|36W-88WLED Strips||36, 44, 72, 88W||8-2′ strips, 1-Driver||12320LM||Dimmable||100-277V||cUL Listed/DLC Approvd|
LED Strips 44W-88W/8-2′
Using the same ultra high efficacy LEDs and electricity supplies developed for our ‘best-in-class’ tube lighting, we offer a guide, field installable LED design kit that provides one of the easiest to install and most inexpensive lighting update available today.
Implementing a direct molecular fusing between the aluminum core PCB carrying the LEDs along with the low profile strip extrusion ensures that the lowest LED at Situ TMP reading we’ve ever seen in a top efficacy LED lighting system. Dependent on the data sets, the calculated Energy Star point is higher than 240,000 hours.
Constructed with premium parts, the MTBF rating on the LED drivers is significantly higher than 140,000 hours. Also accessible 0-10V dimming Ten Years Replacement Warranty.
With these amount of quality, efficiency and cool operating temperatures, we have the ability to offer a complete system replacement warranty for a whole ten years and 100,000 hours stated lifetime with no pro-rating of a comprehensive list of exclusions. Fast, simple installation, only one tool required.
The complete system has been made to reduce installation time and complexity to the very least. Freedom to locate the LED strips and the driver inside the fixture enables, optimizing the fit for each application the installer only places the strips in as desired from the fixture and illuminates three TEK screws using a cordless driver. This provides a favorable mechanical attachment while the integral extrusion ensures exceptional thermal control.
- In 5 easy steps, the retrofit is complete.
- Eliminate Present tubes and ballast
Install new LED Driver
Fasten the fixture
Connect jumpers to the PCB Board
Connect input power
LED Strip Lights 44W-88W/8-2′
|44W-88W LED Fluorescent Retrofit 8-2′ Strips